• Water Rocket Fun - Software for Education and Learning by ...

    www.seeds2lrn.com/rocketSoftware.html

    This is the latest release of Water Rocket Fun (Ver 3.4). Select the Water Rocket Fun software file that you can use below and download it to your hard drive.

    Stem:

    HOW THE BALLOON WORKS


    Hot air balloons are an ingenious application of basic scientific principles. Here we will show exactly how the balloon works, what makes it rise and fall and how a pilot is able to maneuver it when it is in the air.

    The basis of how the balloon works is that warmer air rises in cooler air. This is because hot air is lighter than cool air as it has less mass per unit of volume. Mass can be defined by the measure of how much matter something contains. The actual balloon (called an envelope) has to be so large as it takes such a large amount of heated air to lift it off the ground. For example, to lift 1000 pounds worth of weight you would need almost 65,000 cubic feet of heated air! To help keep the balloon in the air and rising, hot air needs to be propelled upwards into the envelope using the burner (see separate section on burners for more information.)

    A hot air balloon is made up of 3 main parts:

    • The Envelope
      The actual fabric balloon which holds the air


    • The Burner
      The unit which propels the heat up inside the envelope


    • The Basket
      Where the passengers and pilot stand


    The Balloon
    The burner uses propane gas to heat up the air in the envelope to move the balloon off the ground and into the air. The pilot must keep firing the burner at regular intervals throughout the flight to ensure that the balloon continues to be stable. Naturally, the hot air will not escape from the hole at the very bottom of the envelope as firstly, hot air rises and secondly, the buoyancy keeps it moving up.

    The controls for piloting a balloon are actually extremely simple....

    1 - To move the balloon upwards - the pilot opens up the propane valve which lets the propane flow to the burner which in turn fires the flame up into the envelope. Works in much the same way as a gas grill, the more you open the valve, the bigger the flame to heat the air, the faster the balloon rises.

    2 - To move the balloon downwards - the 'Parachute Valve' at the very top of the balloon is what is used to bring the balloon down towards the ground. It is essentially a circle of fabric cut out of the top of the envelope which is controlled by a long chord which runs down through the middle of the envelope to the basket. If the pilot wants to bring the balloon down he simply pulls on the chord which will open the valve, letting hot air escape, decreasing the inner air temperature. This cooling of air causes the balloon to slow its ascent.

    So essentially this takes care of the up and down movement, so how does the balloon move from place to place? Again the answer is very simple, the pilot can maneuver horizontally by changing the vertical position of the balloon because the wind blows in different directions at different altitudes. If the pilot wants to move in a particular direction they simply ascend and descend to the appropriate level and ride with the wind.
    Introduction of Legos EV3 Robotics.
    Review in small groups with the STEM/technology assignment (Power goes off and careers to protect the electrical grids).
     
    Introduction of Legos EV3 Robotics.
    Review in small groups with the STEM/technology assignment (Power goes off and careers to protect the electrical grids).
     
     
     
     Thursday B-day 10/22/15 and Friday A-day 10/23/15:
     
     
    Obj.3.01- "I can understand the world of work and skills need for success"
     
    STEM:
     
    6th- Making Parachutes (using the engineering design cycle) - rotation-Dr. Zoom video section and module assignments measurements and predictions. 
    7th- High flying rockets- read safety process from instruction guide "Launchers and Launching Techniques".
    8th- Engineering Vehicle Design- TETRIX Vehicle construction as directed with the Ideas and Innovation module.
     
    Exploring Career Decisions: